Technogym BIOSTRENGTH LINE, Руководство по техническому обслуживанию

Страница: 132 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 6.8
By monitoring the values shown, you can analyze the communication status.
•
Communication active
If the communication is active, the procedure shows the data; otherwise, nothing appears. The
communication is also correct if measurement “1” always has a value of 127, meaning that the
synchrony byte of the communication has been identified.
•
Weight stack shift
The value of measurements “2” and “3” provide information on the movement of the weight
stack. This value is shown in millimeters “mm”.
By moving the weight stack between two predefined positions whose distance is known and
taking the difference between the value in “mm” when the weight stack is in the 2 positions, the
result is the distance value in mm measured by the encoder, which must match the same
measurement taken by a normal ruler.
If the movement takes place while the machine is moving the weight stack motor, the
machine disables its movement to prevent the plates from falling. However, we
recommend that you make sure in advance that the selected weight can be lifted.
6.2.2. C
OUNTER DISPLAY
The LCD reads:
S E A T : x
W E I G H T : x
The LCD displays the number of complete cycles carried out by the machine during this automatic
test procedure of the seat motor and weight stack motor.