Technogym BIOSTRENGTH LINE, Руководство по техническому обслуживанию

Страница: 561 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 7.387
Figure 7.9.37-3
To disassemble the gas spring:
11. Remove the nut covers
f .
12. Unscrew the screw and nut underneath the
nut covers f using 2 13-gauge wrenches.
13. Unscrew the screw g and the nut h using 2
13-gauge wrenches.
14. Remove the gas spring.
To disassemble the sinker:
15.
Use a 3-gauge hexagonal T-wrench to
unscrew the dowel
i .
16. Use a 30-gauge Allen wrench to unscrew the
ring-nut l .
17. Pull out the sinker from below, being careful
with the block.
To disassemble the SHOULDER REST frame:
18. For each bar, unscrew the 2 screws
m using a
17-gauge wrench.
19. Remove the bar.
20.
To disassemble the SHOULDER REST
frame:
To reassemble the SHOULDER REST GROUP,
follow the above steps in reverse order.