SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 133 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 120 -
Fig5.1.3 2nd Dialog Box of Parameter Set for Linear Tool Magazine
Note:This coordinate value is position at machine Coordinate system(G53).
In Other parameter
: P13=1 ; set interlock between chuck and rotation of spindle
P20= 0 or 1 ; set mode of chuck loose/tighten tool
In Axis parameter : P40_D1=1 ; set for detect position of chuck loose/tighten tool
b) IO ports
Signal PIN Function
M10 PIN21_CN3 Plug Output for tighten tool
M71 PIN9_CN10 plug Output for loose tool (when P20=1 in Other parameter)
M14 PIN24_CN10 plug Detect position of tighten tool
M12 PIN11_CN10 plug Detect position of loose tool
M61 PIN19_CN10 plug Output for Spindle orientation
M22 PIN5_CN10 plug Detect end of spindle orientation
M59 PIN6_CN10 plug Output for huff/blower, to clear dust of tools
c) Steps of tool change
1) Z-axis go home(zero point of G53) 2) Spindle Orientation(it can be omitted)
3) Z-axis go to safe position(prepare to put tool) 4) XY-axis move to position of put tool
5) Z-axis down to position of put tool 6) Chuck loose tool & Huff
7) Z-axis up to safe position (prepare to take tool) 8) XY-axis move to position of take tool
9) Z-axis down to position of take tool
10) Chuck tighten tool
10) Z-axis go to safe position Tool change is finished.
Note: 1. all coordinate value are absolute position at machine coordinate system
2. #301-#400 are taken up at control program for linear tool magazine, cannot be used to the other.
3. If your linear tool magazine is different to this process,please contact with us.