SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 141 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 128 -
Chuck switch Tighten/Loosen Tool
of Spindle
Control code: M10/M11
Output Point:PIN21 of CN3 plug
Tailstock switch Tailstock
Forward/Backward
Control code: M79/M78
Output Point: PIN22 of CN3 plug
Huff switch Huff ON/OFF Control code: M59/M58
Output Point: PIN6 of CN10 plug
Single block key To enter single block
mode
Per Step mode key To enter single step
mode
Switching cycle from “manual
continuous” to “manual increment”
Graphic mode key To enter graphic mode(Only Work on AUTO condition)
Simulate switch/dry
run switch
Handwheel/*1/*10/
*100
Enter controlling condition of handwheel, press again, it will
shift handwheel rate of *1/*10/*100
Diagnosis key Enter the interfaces of diagnosis
Pause key Halt for program
Cycle start key
Press this key and the
system mode
automatically runs
Auto mode, MDI mode, DNC mode
Return Home of
Machine key
To enter mode of return
home of machine
Key Designation Explanation Remarks and operation
explanation
Spindle override keys Up/Down rate of
SP_Speed
Range is form 5% to 150%,16
gears totally
Rate of G00 speed Up/Down rate of
G00_Speed
range is from 5% to 100%,16
gears totally
Rate of feeding speed Up/Down rate of
Feeding Speed
range is from 0% to 150%,16
gears totally
Spindle control keys
CW/CCW/Stop
of Spindle
Corresponding to M03/M04/M05
codes
Rotation of SP in JOG
Point CW/CCW rotation of spindle