SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 119 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 106 -
3.31.7 Inner Rectangle Groove Roughing Cycle (G134/G135)
This cycle starts from rectangle center, linear interpolation cycle until milling rectangle groove.
Format: G134/G135 X_ Y_ Z_ R_ I_ J_ K_ W_ Q_ V_ E_ D_ F_
X_Y_: The starting point in XY plane
Z_ : The distance from point R to the bottom of the hole
R_ : The distance from the initial level to point R level
I_ : Width of rough milling inner rectangle in X-axis (>0)
J_ : Width of rough milling inner rectangle in Y-axis (>0)
K_ : Incremental Width in XY Plane
W_ : Depth of 1st cutting feed, distance from point R level
Q_ : Depth of each cutting feed
V_ : Height between unprocessed surface and cutter (>0)
E_ : Allowance for fine groove
D_ : Tool radius offset number
F_ : Cutting Feedrate
Note: 1. Length & Width of groove rectangle, I & J, should be greater than radius of current tool.
2. Depth of 1st cutting feed, W, should be greater than 0. If depth of 1st cutting feed exceeds the groove
bottom, then the machining is performed at the groove bottom;
3. Allowance for rough milling isn't less than 0, otherwise absolute value of negative number.
4. Range of Tool radius offset number , D, is 0~32. default is 0.
G134: CCW Inner Rectangle Groove Rough cycle G135: CW Inner Rectangle Groove Rough Cycle