SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 166 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 153 -
237,Mode of Generate G code in Teach_In[0:Normal,1:G01]
It sets mode of generate G code in Teach-in function, 0:Normal, 1: Generate G01 in each one
linear movement.
238,Auto Insert one line in middle line during Teach_In[0:Yes,1:Alter]
It sets if insert one line automatically when do teach-in during middle line,0:Yes, insert one
line automatically, 1:alter current middle line.
307,M18xx/M28xx/WAT alarm time(ms)[>=10]
It sets max waiting time for M18xx/M28xx, when over max time,CNC will hints alarm.unit is
ms. Example set to 100 (>=10), also 1000ms, when M1810 code,detect X10 is on within 1000ms,
otherwise CNC hints alarm.
400,Translate DXF file to G code[1:Sequencing,4:Start point ,8:No sequencing]
401,DXF_X-axis coordinate of Start Point
402,DXF_Y-axis coordinate of Start Point
1)When P400=1, CNC will make sequencing according to start/end point of dxf file
2)When P400=4, After make sequencing according to according to start/end point of dxf file,
and compare distance with starting point(P401&P402),starting from nearest point.
3) When P400=8, CNC doesn’t make sequencing automatically. When use Auto-CAD to
make drawing & generate dxf file, we need to take care of sequence of drawing, as dxf files are
saved with drawing sequence.So CNC generate G code files also according to this sequence.
500,G74 equal to ProgramG No.[101-170(101-150Modeless,151-170Mode)]
501,G81 equal to ProgramG No.[101-170(101-150Modeless,151-170Mode)]
502,G82 equal to ProgramG No.[101-170(101-150Modeless,151-170Mode)]
503,G83 equal to ProgramG No.[101-170(101-150Modeless,151-170Mode)]
504,G84 equal to ProgramG No.[101-170(101-150Modeless,151-170Mode)]
These parameters are for user define corresponding G codes for G74-G84.Which is for select
Non-mode/mode status,and user-defined.
551,Machine structure of 5 Axes CNC machine tool(10-99)
552,Reverse direction of compensation with RTCP function(BX+4;BZ+8;AY+16;AZ+32)
553,Y-Axis machine coordinate value on A-axis rotary center(um)
554,Z-Axis machine coordinate value on A-axis rotary center(um)
555,Length of tool when measure rotary center of A-axis(um)
556,X-Axis machine coordinate value on C-axis rotary center(P551=12)
557,AC Axis offset of tool return Transformation of AC Axis (um)
These parameters for for RTCP function with different structure of 5 Axes CNC machine.
Note: It is only works on CNC system with 5 axes at least.
600,Internal multiplier of non-G00 instruction[>=20 valid]
It is set inner rate of G codes except G00.It is valid only when its value>=20.