SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 187 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 174 -
7.5 Other Parameter
P
Other Parameter Ex-Factory
1 Type of Handwheel(0:Panel, 1:Handheld)
0
3 Using Interface Switch on Panel(0: No, 88:Yes)
88
4 Lubricate Automatically (0:Yes, 1:No)
1
5 Time of Lubrication (10ms)
300
6 Interval of Lubricate Automatically(s)
1800
7 Detection for Door Switch(0:No, 1:Yes)
0
8 Type of Door Switch(0:NO type, 1:NC type)
0
9 Special Bit Parameter 0000010001000100
10 Counting Workpieces Automatically(0:No, 1:Yes)
1
11 Increment of shift block
1
12 System Inner Parameter
7
13 Interlock between Rotation_SP & Chuck(0:No, 1:Yes)
0
14 Coolant key is valid on Auto(0:No, 1:Yes)
1
17 Type of Driver Alarm(ALM)(0:NO type, 1:NC type)
0
18 Type of Spindle Alarm(ALM1)(0:NO type, 1:NC type)
0
19 Type of Machine Alarm(ALM2)(0:NO type, 1:NC type)
0
20 Control Mode of Chuck(0:Single, 1:Double)
0
22 External Switch for Chuck(0:No, 1:Yes)
0
24 Time of Chuck(s)
0.00
26 Type of Emergency Stop1(0:NO type, 1:NC type)
0
27 Type of Emergency Stop2(0:NO type, 1:NC type)
0
28 Run/Pause Output(0:No, 1:Yes)
0
29 Alarm Output(0:No, 1:Yes)
0
30 Language(1:Chinese, 0:English)
0
31 Use Inner PMC(0:No, 1:Yes)
1
32 Use High-Speed Inner PMC(0:No, 18:Yes)
18
35 Soft-Limit is Valid when no homing(0:No, 1:Yes)
1
36 Time of CNC system(Year-Month-Day-Hour-Minute)
37 Rate of RS232
6
37-1 OPC Function_Modbus_Station
38 Latched for Rapid Key(8:Yes)
1
39 System Inner Parameter
***
40 System Inner Parameter
-88
41 Backup Current Parameters
42 Recovery Backup Parameters
50 Run from middle Program ask going last line point[8:Yes,0:No]
8
51 Return Safe Point firstly when starting from break point(+4:Z,+8:X)
1
52 Machine Coordinate_Safe Point
1
120 Direction of Manual Feeding Key
1
140 M77:Machine Coordinate VS Reference point 1
0