SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 115 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 102 -
7. Value of first cutting feed in X-axis direction, C, should not be less than radius of 2.0, When
positive number,feed in positive direction of X-axis;when negative number, feed in negative direction of X-axis.
8. Range of Tool radius offset number , D, is 0~32. default is 0.
Command Path:
Command Process:
(1) Rapid positioning to a location within XY plane ;
(2) Rapid down to point R level , and then rapid down to point W level;
(3) First cutting feed(c) in X-axis direction, Line 1 is feed with linear interpolation ;
(4) Whole Circle interpolation with arc 2 ;
(5) Cutting feed with increment width (K) from starting point to center until radius of round
workpiece is (I+E);
(6) Cutter rapid return to point R level in Z-axis and then rapid traverse to starting point ;
(7) Cutter rapid down to depth of unprocessed end surface & each cutting feed (W+nQ);
(8) Loop run (4)~(7) until finish outer circle rough milling surface with depth of Z point;
(9) Return to point R level ;
(10) Return to starting point in XY plane.