SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 143 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 130 -
The system adjusts one-level menu operation, intuitive, convenient, shortcut, prompt
comprehensive information.Powering on system is to enter the main screen.
Fig6.2 Displayer
Press “Program” key enter program management area.it could edit,alter, diagnosis, delete,and
copy etc.
Press “Parameter” key enter parameter management area.it could refer,alter to every
parameters.
In manual condition,the system could process workpiece.
6.5 Manual Operation
6.5.1 Manual Continuous
Continuous operation is basis on the time of pressing, Press to feed, up to stop feeding. Making
sure the axis and using “Manual Feeding Key” to feed, feeding speed displays on the interface (F)
multi Rate.
When continuous starting, press “Rapid” to switch the speed set by P1,P2 in Speed parameter,
also G00 speed. If set the speed higher than the speed in parameter, the feed speed will be P1,P2 in
Speed parameter times rapid override.
In order to facilitate the user single axis cutting in the manual function, setting the manual speed
in manual status. Press “F” and input the speed.
When the hard limit point beyond positive and negative feed running axis two direction at, stop
the feed and prompt to feed reverse direction.(the same as hereinafter)
The manual maximum speed is limited by P3 in Speed parameter, when setting the speed is
higher than the value of parameter, then will be P3 in Speed parameter.
When P38=8 in other parameter, “Rapid” is change into a switch, press once to turn on (no more
to always press), press again to turn off.
G Codes & current
tool & compensation
Feeding Speed
SP_Spee