SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 192 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 179 -
37,Rate of RS232
It sets rate of communication with RS232. Different value corresponding to different
rate:[0=7200;1=9600;2=14400;3=19200;4=38400;5=57600; 6=115200].
Attention:The Rate of both CNC & PC must keep same.
37-1,OPC Function_Modbus_Station
It sets Station number of Series port with OPC modbus function, Odd parity: 10000+station
number; Even parity: 20000+Station number; No parity:30000+station number; +100000:Series
Port 1 as OPC.
38,Latched for Rapid Key(8:Yes)
It sets if latched for “Rapid” key on panel. 8:Yes. Reciprocating control.
41,Backup Current Parameters
It is for backup current parameters as ex-factory set. It is used for backup parameters after
debugging is finished well, easy to maintain.
Attention: select this parameter,press “Enter” key twice,finish backups.
42,Recovery Backup Parameters.
It is for recovery current parameters to ex-factory set. It is normally used for recovery to
ex-factory set when parameters set wrong.
Attention: after finish this operation,last parameters will be occupied.
50,Run from middle Program ask going last line point[8:Yes,0:No]
It sets whether CNC moves to end point of last block when start from middle line,8:Yes, 0:No.
51,Return Safe Point firstly when starting from break point(+4:Z,+8:X,+16:Feed Hold)
It sets whether CNC go to safe point firstly when P50=8.+4:Z-axis go to safe point; +8:X-axis;
+16: feed hold.
52,Machine Coordinate_Safe Point
It sets machine coordinate value of safe point after set of P51.
120,Direction of Manual Feeding Key
It sets feeding direction of manual feeding key of each axis on panel.
Value Function
+4 Direction of X_Manual Feeding is opposite;
+8 Direction of Y_Manual Feeding is opposite;
+16 Direction of Z_Manual Feeding is opposite;
+32 Direction of A_Manual Feeding is opposite;
140,M77:Machine Coordinate VS Reference point 1(1001/2001/3001/4001:X/Y/Z/A)
It sets whether M77 is valid after compare axis machine coordinate value & coordinate value
of 1 st reference point, 1001: compare axis is X-axis, 2001:Y-axis,3001:Z-axis, 4001:A-axis. For