SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 97 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 84 -
Note: 1. Before the drilling axis can be changed, the canned cycle must be canceled.
2. In a block that does not contain R, Q , boring is not performed.
3. Be sure to specify a positive value in Q. If Q is specified with a negative value, the sign is ignored. Set
the direction of shift is set by P4 & P5 of User parameter. Specify P & Q in a block that perform as boring. If
they are specified in a block that doesn't perform boring, they cannot be stored as modal data.
4. Do not specify a G code of the 01 group(G00-G03) and G87 in a single block. Otherwise, G87 will be
canceled and alarm.
5. In the canned cycle mode, tool offsets are ignored.
Warning: The spindle system must support orientation function when use G87. SZGH cnc system output
M61(Pin19_CN10 plug) for orientation, M22(Pin5_CN10 plug) detects orientation end.
Example:
N10 M3 S500 ; Cause the spindle to start rotating.
N20 G90 G87 X300 Y-250 Z-150 R-100 Q5 P1 F120;
Position, bore hole 1. Orient at the initial level, then shift by 5mm.Stop at point Z for 1s.
N30 Y-350 ; Position, drill hole 2.
N40 Y-550 ; Position, drill hole 3.
N50 X1000 ; Position, drill hole 4.
N60 Y-550 ; Position, drill hole 5.
N70 G98 Y-750 ; Position, drill hole 6.
N80 G80 G28 G91 X0 Y0 Z0 ; Return to the reference position
N90 M5 ; Cause the spindle to stop rotating.