SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 147 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 134 -
6.6 Auto Operation
Auto refers to processing the editing program of workpiece. This system can start at arbitrary
point, and also can start at arbitrary line or with arbitrary tool. Starting arbitrary line or with
arbitrary tool must use absolute coordinate to edit the program. Press “Auto” to enter Auto mode in
Manual mode. User can’t move coordinate manually in Auto mode.
Select running program:
Press “Program” key to enter program interface, press “↑ ↓” to move
cursor to a program which is going to run , press “F7” key to select the program as processing
program and switch to main screen automatically.
Switch display of coordinate:
Press “PgUp”/ “PgDn” to switch the display which correspond to
“Relative” “Absolute” “All”. & “Graphic”.
Relative Coordinate Absolute Coordinate All Coordinate Graphic
6.6.1 Automatic Processing Mode
“Single/continuous”: Press “Single” key to switch cycle.
“Continuous”: The program continue to execute every program segment(program line) to end or
the instruction of stop to stop.
“Single ”: The program just execute one program line and end, wait another operation or press
“Run” again to execute one next program line.
“Simulate”: The program is speedy simulate, the axis of coordinate can’t move.
Table of Status Display about Manual/Auto
Manual Continuous Manual Increment Handwheel Feed Hold
Auto Continuous Auto Single Simulate
“Coordinate/Graphic”: Press “Graphic” in Auto mode to switch cycle.
“Automatically coordinate”: The axis of coordinate will display with value.
“Automatically Graphic”: The axis of coordinate will display with a figure.
“Feed Keep”, also feed hold, Press “Manual” twice on “AutoCon Run” condition or Press
“Manual” on “AutoCon Stop” after running.
Press “X” “Y” “Z” on “Graphic” mode to shift 2D mode(XY,ZX,YZ) plane, press “0” back to 3D.
XY Plane ZX Plane YZ Plane