SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 170 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 157 -
9,Manual Feeding Speed(mm/min)
It is the speed of feeding axis in Manual.Range:< max feeding speed
Attention:in Manual mode, press “F” key ,can set the parameter directly.
10,Manual Spindle Speed (rpm)
It is set for speed of spindle in mode of manual. Unit:rpm.
Attention:in Manual,press “S” key ,can set the parameter directly.
11,Take-off speed(mm/min)
It is beginning speed of feeding axis when acceleration/deceleration.when it is smaller than
acceleration/deceleration, accelerate/decelerate of speed start from the beginning feed speed. when
it is bigger than acceleration/deceleration, the speed reached at setting speed directly. Unit:
mm/min.
Attention:Generally,stepper system<=100,servo system<=500.
12,Maximum mutation speed(mm/min)
It is max speed increment when multi-axial running track-interpolation. Also max changing
value of speed.
Example:when it is 300,the speed of X axis(multi-axial track-interpolation)up from F800 to
F1600,800(=1600-800)>300,so the process is up from F800 to F1100,and then F1600.
13,Limit G01/G02/G03 Speed of each axis [1:Yes, 0:No]
It is set for whether limit speed of each axis when G1/G2/G3 interpolating.
14,Max Speed of X_G1/G2/G3 (mm/min) 15,Max Speed of Y_G1/G2/G3 (mm/min)
16,Max Speed of Z_G1/G2/G3 (mm/min) 17,Max Speed of A_G1/G2/G3 (mm/min)
It is for the Max running speed of each alone feeding-axis when G1/G2/G3 interpolation.
18,X_Acceleration/Deceleration Constant 19,Y_Acceleration/Deceleration Constant
20,Z_Acceleration/Deceleration Constant 21,A_Acceleration/Deceleration Constant
It is time constant of each one feeding-axis acceleration/deceleration alone,the bigger it is ,the
faster the acceleration/deceleration is. Range is 1~99999
Attention:This value depends on the machine structure,the heavier the load is ,the smaller the value is.With
stepper system,the value should less than 15000.
22,Acceleration/Deceleration Constant When Auto Run [1-500]
It is for set constant of Acceleration/dec-eleration in auto.the range is 1-500.It is mainly for
distinguish Auto and Manual,only the difference is too much,set it is effective.
23,Handwheel_Acceleration/Deceleration Constant [500--32000]
It is for set constant of acceleration/deceleration of Handwheel.the range is 500-32000.
24,Handwheel_Acceleration/Deceleration Constant when dry [>500]
It is for set constant of acceleration/deceleration when handwheel start program. the range is