SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 135 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 122 -
Fig5.2.3 2nd Dialog Box of Parameter Set for Umbrella/Hat type Tool Magazine
Note:This coordinate value is position at machine Coordinate system(G53).
1.Current Tool No. : It sets current tool number in spindle, if without tool in spindle, set to 0.
2.Current Tool POT
: It sets current tool seat in tool magazine.
3.Total Tools : It sets total numbers, Range: don’t over 20 tools.
Suggestion: When tools are over 20, please use our SZGH-CNC1000MDcb series CNC system.
4.If Z go to change position
: It sets whether Z-axis go to tool change position, 1:Yes, 0:No.
5.Z_Change Position Coor : It sets Machine Coordinate value of tool change position in Z-axis.
6.If XY got to change position
: It sets whether XY-axis go to tool change position, 1:Yes, 0:No.
7.X_Change Position Coor : It sets Machine Coordinate value of tool change position in X-axis.
8.Y_Change Position Coor : It sets Machine Coordinate value of tool change position in Y-axis.
9.If A go to change position
: It sets whether A-axis go to tool change position, 1:Yes, 0:No.
10.A_Change Position Coor : It sets Machine Coordinate value of tool change position in A-axis.
11.Position Speed of XYZA
: It sets the speed of XYZ that move to tool change position.
12.If Z go to safe position : It sets whether Z-axis go to safe position, 1:Yes, 0:No.
13.Z-axis Safe Position : It sets value of safe height in Z-axis(increment).
14.If A_Servo tool magazine
: It sets if rotation magazine is controlled by A-axis, 1:Yes, 0:No
15.Distance between each tool : It sets distance between each tool.
16.If A go to zero point
: It sets if A-axis go to zero point, 1: Yes, 0: No .
17.If Z go to zero point : It sets if Z-axis go to zero point , 1: Yes, 0: No .
18. If spindle Orientation : It sets if spindle do orientation, 1: Yes, 0: No .
19.Rotating Speed of A_Axis
: It sets speed of rotating for magazine.
In Other parameter
: P13=1 ; set interlock between chuck and rotation of spindle
P20= 0 or 1 ; set mode of chuck loose/tighten tool
In Axis parameter : P40_D1=1 ; set for detect position of chuck loose/tighten tool