SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 163 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 150 -
501 G81 equal to ProgramG No.[101-170(101-150Modeless,151-170Mode)]
0
502 G82 equal to ProgramG No.[101-170(101-150Modeless,151-170Mode)]
0
503 G83 equal to ProgramG No.[101-170(101-150Modeless,151-170Mode)]
0
504 G84 equal to ProgramG No.[101-170(101-150Modeless,151-170Mode)]
0
551 Machine structure of 5 Axes CNC machine tool(10-99)
1
552 Reverse direction of compensation with RTCP function(BX+4;BZ+8;AY+16;AZ+32)
1
553 Y-Axis machine coordinate value on A-axis rotary center(um)
1
554 Z-Axis machine coordinate value on A-axis rotary center(um)
1
555 Length of tool when measure rotary center of A-axis(um)
1
556 X-Axis machine coordinate value on C-axis rotary center(P551=12)
0
557 AC Axis offset of tool return Transformation of AC Axis (um)
0
600 Internal multiplier of non-G00 instruction[>=20 valid]
105
Explanation about User Parameter(processing parameter)
1,(d)Escaping Amount of G73 (mm)
It sets every escaping amount in G73 code, unit:mm.
2,(d)Escaping Amount of G87 (mm)
It sets every escaping amount in G87 code, unit:mm.
3,Direction of offset Q in G76 [G17](1:+X,2:-X,3:+Y,4:-Y)
It sets the direction of offset Q in G76 code in XY plane(G17). 1:+X,2:-X,3:+Y,4:-Y.
4,Direction of offset Q in G87 [G17](1:+X,2:-X,3:+Y,4:-Y)
It sets the direction of offset Q in G87 code in XY plane(G17). 1:+X,2:-X,3:+Y,4:-Y.
5,Stopping Angle when Spindle orientation at G76/G87 (0.1degree)
It sets stopping angle when spindle do orientation at G76/G87 code. unit:0.1degree.
6,Mode of clearance in G74/G84(0:Return with d; 8: Return to R)
It sets mode of clearance in G74/G84;0:High-speed,return with d; 8: Normal, return to point R.
7,(d)Escaping Amount of G74/G84 (mm)
It sets every escaping amount in G74/G84 code, unit:mm.
8,Pause Time Before Raise Up Tool at G73G83(ms)[Abs>5,-:G01;+:G00]
It is set pause time when raise up tool every time on G73G83 code, Unit: ms, Range: >5 . Set to
negative number, raise up tool with G01 mode, set to positive number, raise up with G00 mode.
17,Interlock between Running Program & SP-Rotating [1 mean Yes,0 mean No]
It is for interlock between run program and run spindle,when set as 1 means that running
program with running spindle;when set as 0 means that running program without check spindle
running.
18,Times of auto-cycle running(M20)
It is for times of run M20 code in the program,negative number mean run countless times.