SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 162 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 149 -
7.1 User Parameter
P Parameter Ex-Value
1 (d)Escaping Amount of G73 (mm)
5.000
2 (d)Escaping Amount of G83 (mm)
5.000
3 Direction of shift amount Q in G76 [G17](1:+X,2:-X,3:+Y,4:-Y)
1
4 Direction of shift amount Q in G87 [G17](1:+X,2:-X,3:+Y,4:-Y)
1
5 Stopping Angle when Spindle orientation at G76/G87 (0.1degree)
0
6 Mode of clearance in G74/G84(0:Return with d; 8: Return to R)
0
7 (d)Escaping Amount of G74/G84 (mm)
0.00
8 Pause Time Before Raise Up Tool at G73G83(ms)[Abs>5,-:G01;+:G00]
0
17 Interlock between Running Program & SP-Rotating [1:Yes, 0:No]
1
18 Times of auto-cycle running(M20)[<0: Endless Loop]
-1
21 Dwell between G01/G02/G03 blocks(ms)[>100]
0
22 Dwell between G00 blocks (ms)[>100]
0
23 Acceleration/Deceleration Constant of Handwheel [50-100]
70
33 Type of Detect SP_Speed Reached(0:M69 Relay, 8:SP_Encoder)
1
34 Allow error of SP_Speed that detected by SP_Encoder(RPM)
1
200 Waiting time to screen-saver [>=2minutes]
1
202 System Inner parameter,can’t be altered.
1
203 Inspect overcut when tool radius offset (6326274:Yes,34818:NO )
6326274
206 G21-Metric/G20-Inch Mode(512:Metric, 1024: Inch, other: G20/G21)
512
210 Type of Graphic display area(8:manual,0:Automatic)
1
211 Display X-axis Negative area (1:Yes, 0: No)
1
212 Display X-axis Positive area (1:Yes, 0: No)
1
213 Display Y-axis Negative area (1:Yes, 0: No)
1
214 Display Y-axis Positive area (1:Yes, 0: No)
1
215 Display Z-axis Negative area (1:Yes, 0: No)
1
216 Display Z-axis Positive area (1:Yes, 0: No)
1
230 Running program through input point (+4+8+16+32+64+128: X26-X31)
1
231 Mode of "Delete" key [0:backward deletion,1:Forward delete]
0
232 Detect SP_Zero position before tapping [18:Yes,0:No]
1
233 G06 Circle teaching function[0:No, 1:Yes]
1
234 Activate Program Back Function with Han8:Yes, Other: No]
1
235 Automatically generate comments when teaching [0:Yes,1:No]
0
236 Type of Arc code when Teach-in[0:G5/G6 IJK,1:G2/G3 R]
0
237 Mode of Generate G code in Teach_In[0:Normal,1:G01]
0
238 Auto Insert one line in middle line during Teach_In[0:Yes,1:Alter]
0
307 M18xx/M28xx/WAT alarm time(ms)[>=10]
1
400 Translate DXF file to G code[1:Sequencing,4:Start point ,8:No sequencing]
0
401 DXF_X-axis coordinate of Start Point
0
402 DXF_Y-axis coordinate of Start Point
0
500 G74 equal to ProgramG No.[101-170(101-150Modeless,151-170Mode)]
0