SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 189 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 176 -
4,Lubricate Automatically (0:Yes, 1:No)
It sets whether system use lubricate automatically. 0:Yes, lubricate automatically is valid, 1:No
use lubricate automatically.
Attention:Lubricate automatically according to time of running program.
5,Time of Lubrication (10ms)
It sets the time of lubricate automatically , also time of outputting M32, PIN9_CN3 Plug.
Unit:0.01s.
6,Interval of Lubricate Automatically(s)
It is the interval that lubricate every time,also the interval that twice M32 is valid.
7,Detection for Door Switch(0:No, 1:Yes)
It sets whether system detect the signal of protective-door. 0:No detect, 1:Yes.
Attention:1. Input point for door switch: M12, PIN11_CN10 plug.
2. After set P7=1,system can work in Manual,and stop processing in Auto.
3. Pin for detect Chuck_clamp&Door-switch are M12, only one usage is valid.
8,Type of Door Switch(0:NO type, 1:NC type)
It is type of Door-switch. 0:NO type(normal open),1:NC type(normal close).
9,Special Bit Parameter
It is bit parameter,each one bit have different functions,details as following:
Bit
D15 D14 D13 D12 D11 D10
D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
Value
0 0 0 0 0 0 0 1 0 1 0 0 0 1 0 1
D0: Null; default value is 1,which cannot be altered.
D1: 1:Clear Part Number after reboot system; 0:Keep Part number.
D2: 1:Indent automatically between characters when edit; 0:No blank;
D3: Null; default value is 0,which cannot be altered.
D4: Null; default value is 0,which cannot be altered.
D5: 1:Don’t stop Rotation_SP & Coolant when pressing “Reset” key;
D6: 1:Each axis run with itself speed when G00; 0: linkage movement;
D7: 1:Don’t call related tool compensation when tool change manually; 0: Call related tool
compensation automatically; default is 0.
D8: 1:Save status of Chuck(M10/M11) when power off;Recovery original status when
booting system; 0: System output M10 automatically when booting.
D9: Select Mode of tool set & input mode of Redeem;
D10: 1:Auto Sequence for block when programming;
D11: 1:Analog of 1st spindle outputs to both +10V_CN3&CN10;
D12: 1:Shield function of “Skip” ,also “/” in the front of blocks is invalid;
D13: 1:Shield function of “Return” key on operational panel;
D14: 1:Shield function of “Start” key on operational panel;
D15: 1:Value of Redeem displays with Increment type; 0: Value of Redeem displays with
absolute type;
Attention:some bits of this bit parameter cannot be altered , otherwise maybe system will work abnormal.