Quick Start EVK-W262U
Download the EVK-W262U software
(and documentation) from www.u-blox.
com/evk-downloads. Click on “Resources
to download” and install the software.
See notes on back of the card.
1. Insert the EVK-W262U kit into a
USB port on your computer.
2. Verify that the FTDI driver is
installed successfully. If necessary,
download the drivers for the FT231X
chipset from www.ftdichip.com.
3. Download the latest firmware to the
ODIN-W2 module using s-center
evaluation software.
1. Setup
UBX-15016340 - R02
RGB
LED
(LD5)
USB
Connector
(J2)
Reset
button
(SW1)
Restore
button
(SW2)
UART
indication
LEDs
(LD3, LD4,
LD1, LD2)
ODIN-W2
multiradio
module
(M1)
