SZGH SZGH-CNC1000MDb Series, Руководство пользователя, Страница: 164 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 151 -
21,Dwell between G01/G02/G03 blocks(ms)[>100]
It is for set delay time between G01/G02/G03,it is for solve the over-cutting in the corner.
22,Dwell between G00 blocks (ms)[>100]
It is for set delay time after run G00 ,it is effective that more than 100ms.
23,Acceleration/Deceleration Constant of Handwheel [50-100]
It is for set the constant of handwheel smoothly Acceleration/dec-eleration. the smaller it is,the
faster the Acceleration/dec-eleration is,but much vibration.
33 Type of Detect SP_Speed Reached(0:M69 Relay, 8:SP_Encoder)
It sets the type of detect SP_Speed reached. 0 means that detect if M69(inner register of plc
ladder) input is valid; 1 means that system detect spindle encoder for ensure spindle speed is
reached.
34Allow error of SP_Speed that detected by SP_Encoder(RPM)
It sets the allowable error of coding speed(S) & encoder feedback speed . Unit: rpm.
200,Waiting time to screen-saver [>=2minutes]
It is the time that enter protection screen when system stay in main screen and without
dialog,don’t enter screen protection if less than 2 minutes,press any keys to return back.
201,Delay time before detect zero pulse when threading(ms)[>100]
It is for set delay time before check Z pulse when process screw.
203,Using Pause key in Panel (23103490:Yes,6326274:No)
It is set for if using Pause key in operational panel, when set to 23103490, which means using
Pause key; when set to 6326274, shield the Pause key.
206,G21-Metric/G20-Inch Mode(512:Metric, 1024: Inch, other: G20/G21)
It sets programming mode about Metric or Inch mode, 512: Programming with Metric, 1024:
Programming with Inch mode, Other values: Metric/Inch mode are shifted by G20/G21
210,Type of Graphic display area(8:manual,other:Automatic)
It set the type of graphic display area, when set to 8, the graphic display area is set
manually,& related parameter; when set to others, cnc system will adjust graphic display area
automatically.
211,Display X-axis Negative area (1:Yes, 0: No)/212,Display X-axis Positive area (1:Yes, 0: No)
213,Display Y-axis Negative area (1:Yes, 0: No)/214,Display Y-axis Positive area (1:Yes, 0: No)
215,Display Z-axis Negative area (1:Yes, 0: No)/216,Display Z-axis Positive area (1:Yes, 0: No)
P210-P216 are set for if that CNC system display related area when type of graphic display
area is manual.
230,Running program through input point (D2-D15: X16-X31)