SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 173 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 160 -
original value of P41 plus 4(Eg.: P41=0 +4= 4) means that the IJK of G02/G03 is the coordinate
value from end point to center, otherwise IJK of G02/G03 is the coordinate value from starting
point to center.
48,Compensation Speed in B Mode (mm/min)
It is the compensation speed in B compensation mode.unit:mm/min.
48-1,Beginning Compensation Speed in B mode (mm/min)
It is beginning compensation speed in B compensation mode.it is valid when it >10.
48-2,Acceleration/Deceleration Constant in B mode (mm/min/s)
It is the acceleration/deceleration constant in B compensation mode (also P41=8/12) .
Range: >=10.
49,Activate Speed Processing Function[1:Yes ; 0:No]
It is set for if activate speed processing function, 1 means yes, activate speed processing
function, 0 means no activate the function.
49-1,End speed when reverse&decrease speed during running(mm/min)
It is set ending speed when CNC is running with reverse direction & decreasing speed, unit is
mm/min.
50,Handwheel_Stopping Speed (mm/min)[>100]
It is the speed when handwheel stop. the bigger it is ,the faster handwheel stop.
51,SP_Speed when exit at following tapping mode
It is min speed before spindle reverse rotation when tapping.
52,SP_Reverse Backlash Compensation when tapping
It is reverse backlash compensation value before spindle reverse rotation when tapping. Unit:
Pulse
53,Advance Retired Value before reverse rotation of following tapping
It is advance retired value before spindle reverse rotation when tapping. Unit:um.
Range:10-5000
54,Retired Speed when tapping (mm/min)[>=60]
It is speed when spindle retired during tapping. Unit: mm/min
58,Beginning Speed when hardware limitation (mm/min)
It is beginning speed that motor touch hardware limitation switch. When cnc system is
configured with servo, no need to set beginning speed , set to 1 normally.