SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 176 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 163 -
+16384: run M05 & turn off analog voltage output.
232,Orientation Direction of SP-axis[0:Pos.,1:Neg.,2:Near]
It set orientation direction of SP-axis when rigid tapping with interpolate mode.0: Positive
direction, 1: Negative direction, 2: nearest direction
233,Homing Control Mode of SP-Axis
It set homing control mode of SP-axis, 1: Controlled by Pulse(CN10 plug+spindle encoder), 2:
Control by Spindle driver(output M61, detect M22 is valid), 16 or 32: after orientation, move SP to
degree of P234, 16: Output M75: detect M22 is valid.
234,Offset Degrees when SP_Orientation(0.1Deg)[Neg:Non-Orientation]
It set offset degrees after orientation end, unit:0.1degree, if negative number, don’t
orientation.
235,SP_Homing Speed(0.1 rpm)
It set homing speed of Sp-axis,unit: 0.1rpm.