Studer Vista 5 M3 Скачать руководство пользователя

Страница: 519 / 564

Vista 5 M3 Digital Mixing System

RELINK 8-3

Document generated: 28.08.13

SW V4.9

RELINK (RESOURCE LINKING)

Studer RELINK is an I/O sharing network technology available for all Studer

products (OnAir consoles, Vista consoles and Route 6000) allowing direct

access to sources and targets throughout the entire network – provided that

the desired sources and targets are configured as ‘NetSources’ and therefore

available for remote components of the system.

RELINK allows the design of ‘distributed’ audio network systems – enabling

Studer products to access all sources and targets of the complete system, and

therefore enhancing the flexibility of your facility.

Mic control takeover mechanisms are implemented on both the OnAir and

the Vista consoles.

On the OnAir consoles, signaling is coupled with the I/O sharing, this means

that red light, fader start and signaling connections are automatically follow-

ing any console where the audio signal is used, and correctly applied to the

source (Studio, CD Player, etc) from anywhere.

RELINK requires the following SW versions (or newer): Vista SW V4.1,

OnAir SW V3.1, and Route 6000 SW V2.0.

RELINK is a software feature that, on the Vista side, does not depend on

hardware, allowing systems still using a Performa DSP core to be part of the

network, as long as all the mic preamplifiers are of the D21m type.

8.1 Input Patching

With SW V4.1, a new source and target navigator menu has been in trod uced.

It still is a pull-down menu, but it shows not only local sources and targets,

but also sources and targets of all systems connected via the network.

Shared inputs can be selected directly from any of the displayed systems.

The sources of OnAir consoles – e.g. a DJ microphone – are appearing as

‘Logical Inputs’, and their output signals as ‘Master Outputs’.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды