Studer Vista 5 M3 Скачать руководство пользователя

Страница: 404 / 564

Vista 5 M3 Digital Mixing System

5-108 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

Notes

Automated Graphical Controller items are not selectable using the Object

Picker for the Event List Filter.

If objects are selected for display that do not have recorded Events, the Event

List will be empty.

Event List Display

Selected Events may be displayed in a number of ways.

• Individual Events: Individual Events will be displayed next to their time

code location. The Event label contains the channel type, channel number,

control, and control value. Timecode locations are always shown for each

individual Events.

• Consolidated Event Lists: Only timecode locations with recorded Events

are displayed. If only a single Event is recorded, it will be displayed. If

multiple Events have been recorded at the same timecode location, an

Event List header will be shown, but the contents will not be displayed.

The header label will indicate the number of Events in the list and contains

a ‘

+’

button. Clicking the ‘+’ button will expand the list, its contents will

be displayed, and the ‘+’

button changes to a ‘

–’

button. Clicking the ‘

–’

button will close the list.

• Expanded Event Lists: All Events are shown individually. If an Event is

part of an Event List, the header will be the first item for that particular

timecode location.

Using the display modes listing above, any combination of displays may be

accomplished.

Important Note

The use of the term ‘Mute’ is used literally in the Event List Editor. If the

Mute is listed as ‘ON’ in the Event List, the post fader channel output will be

cut. Muting will be activated. The associated

MUTE

key on the desk will not

be illuminated

Notes

The Event List Editor only shows a subset of all the events stored within a

Mix Pass. Making an edit can change what is shown and depending on the

edit performed, some events may drop off the list.

Timecode locations without recorded Events will not be displayed in the Event

List Editor.

Selecting Events to be Edited

From the Events chosen for display, single Events, an entire Event List, or a

selected group of Events and/or Event Lists may be chosen for editing.

Use the following procedures to select Events and/or Event Lists may be

chosen for editing:

• Individual Events: Individual Events may be selected by clicking the Event

label or the associated timecode. To select individual Events from an Event

List, the list must first be expanded.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды