Studer Vista 5 M3 Скачать руководство пользователя

Страница: 129 / 564

Vista 5 M3 Digital Mixing System

Parameters 3-41

Document generated: 28.08.13

SW V4.9

FORMAT

Rotary This serves as the format selector in all multi-format panning modes. The fol-

lowing selections are possible: L-R, LCR, LCRS, 5.1, EX, and 7.1.

Depend-

ing on this selection, the actually required parameters are displayed.

PANARND On/Off

This key activates the unique Pan-Around function.

If active, the FRONT L-R,

F-R and REAR L-R controls become inactive.

PANARND

Rotary

This is a single-knob function that provides an easy-to-use pan setting around

all selected loudspeakers (depending on format) in a circular fashion.

If active,

the FRONT L-R, F-R and REAR L-R controls become inactive.

CENTER On/Off

On/off selector for center channel use.

CENTER

Rotary

Center channel percentage control; 0% = no center channel use (phantom

center), 100% = center channel fully active.

DIVERGE Off/Front/All

Divergence mode selector. The divergence function can be applied to panning

between all channels or the front channels only. The key toggles between off,

front and all.

DIVERGE

Rotary The divergence function is used to bleed portions of sound from the panned

output to the other speakers. For example, if the divergence is active and

set to 100%, the LR control will act as a traditional L/R pan pot (assuming

there is no center channel contribution). Panning to full left will result in full

attenuation of the right channel. If the divergence is then set to 50%, one half

of the left channel signal strength will be

bled

into the right channel (with-

out effecting the left channel). With the divergence control set to 1%, equal

signal will be fed to both channels and the LR pan pot will have no effect.

Divergence values are as follows: 1%, 2%, 3%, 4%, 5%, 10%, 15%, 20%,

25%, 30%, 35%, 40%, 45%, 50%, 60%, 70%, 80%, 90%, 100%. Careful use

of this control may have the effect of increasing the size of the mix ‘sweet

spot’, particularly for large auditoria. Misuse of this control may result in

essentially mono panning.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды