Studer Vista 5 M3 страница 63 Скачать руководство пользователя

Страница: 63 / 564

Vista 5 M3 Digital Mixing System

Desk Operation 2-23

Press

SETUP GROUPS

again in order to leave the setup mode.

Assignment of channels to mute groups are saved within a so-called ‘start

snapshot’ of each title. I.e., this information is saved once per title when the

title is closed.

2.6.9.4

Off-Air Conference

CONF: SETUP

If the DSP configuration contains n-x buses, it is possible to setup an off-

air conference between n-x owner channels. After pressing this key, all n-x

owner channels become half-lit and members of a conference can be selected

(full-lit). As soon as their fader is closed, they will be able to talk to each

other. The conference setup is immediately edited, also while the console is

still in the setup mode. This allows for frequent changes of the conference

members, e.g. during election reports. Talking to a member of the conference

will activate talkback to the whole conference at the same time.

SETUP: CONF ON

The ON key is lit as soon as a conference is set up. The conferencing may

temporarily be deactivated by clicking on the conference icon

in the

toolbar or by pressing

CONF ON

on the control bay. In this case the conference

definition is retained. As soon as the conference is reactivated globally (by

pressing

CONF ON

or clicking on the conference icon in the toolbar again),

the previously selected channels may talk to each other again.

The conference icon in the toolbar has three states:

Grayed out

No conference active nor defined

Colored Conference active (if member faders closed)

Colored, crossed out Conference defined, but temporarily deactivated (even if member faders

closed).

Note:

In certain circumstances, also an AUX master can be selected as a conference

member (indicated by its half-lit

LINK / SEL

key). This is intended for adding

e.g. an on-air signal to the conference. See details below. For more informa-

tion refer to

chapter 4.9.7.

This Channel is Part of Mute Groups 1, 3, and 8

Document generated: 28.08.13

SW V4.9

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды