Studer Vista 5 M3 страница 392 Скачать руководство пользователя

Страница: 392 / 564

Vista 5 M3 Digital Mixing System

5-96 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

Check ‘Protect From Automation Enable’ for the selected set of controls

and/or the General Patch. Click the ‘USE’ button to enable Protection for

the selected Protection Set.

Note

Either the ‘Current’ or ‘Both’ radio button in the ‘Use’ section of the Automa-

tion Protection window

must

be selected to enable the ‘Edit’ button.

5.14.1.2

Saving Protection Sets

Any number of Protection Sets may be created and saved. A temporary Protec-

tion Set will persist in the system unless it is overwritten, even if the Mix Tree

and Title are closed. Temporary and modified sets may be saved at anytime.

Using the following procedure, Protection Sets may be saved:

Once a Protection Set has been created or modified, click the ‘Save As…’

button. The Protection Set save box will open.

Enter a name for the new set in the ‘New Protection Set:’ field. Click

‘Save’ and the new set will be created and assigned the entered name.

The newly saved set will become the current Protection Set and will be

added to the list of available sets (which appears in the Protection Set

section of the Automation Protection window).

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды