manualshive.com logo in svg

Studer Vista 5 M3, Руководство по эксплуатации

Поделиться
Скачать
Studer Vista 5 M3 Скачать руководство пользователя страница 351

Vista 5 M3 Digital Mixing System

AutoTouchPlus  5-55

Document generated: 28.08.13

SW V4.9

is defeated for controls in READ, and only written values will be heard.

 

  •  The

 

TOUCH – Record 

button may be overridden by checking options in 

the <Master Panel Overrides> section of the Master Panel Options page. 

Faders and Encoders can have

 

TOUCH – Record 

set to <ON>, <OFF>, 

or to follow the ACU window <Follows Panel>.

 

TOUCH – Record 

for 

Switches can also have <ON> and <OFF> overrides or be set to follow 

the ACU window <Follows Panel>.

5.8.3 

Touch Hold

  

With 

TOUCH – Hold

 

(ACU button or desk key) engaged, touching a control 

will change it to being in a ‘held’ state. 

 

Held Controls 

Controls that are in Held status have specific functional qualities:

 

  •  They maintain their current status when physically released (Un-touched)

 

  •  They may be selected as a group (Held Objects) for additional automation 

operations (such as a preselector set). 

  

When 

TOUCH – Hold

 

is activated the Touch event is registered by the system 

and the Un-touch event is suppressed. Touching a control will change it to 

the next mode available. More importantly, the control will ‘hold’ that mode 

when it is released. 

 

  When released, a control in RECORD will not punch-out and change back to 

ENABLE, it will stay in RECORD. Likewise a control in AUDITION will 

not revert to READ when released.

 

  To sum it up, if 

TOUCH – Hold

 

is used alone (without

 

TOUCH – Record

), 

controls will change to their AUDITION modes and stay there when released. 

 

 

TOUCH – Hold

 

 

With only 

TOUCH – Hold

 

engaged (without

 

TOUCH – Record

), Touch 

events perform the following functions when dynamic controls are in the 

Control Modes indicated (remember Un-touch events are suppressed):

 

  •  READ: Touch will change to and stay in AUDITION. 

 

  •  WRITE ENABLE: Touch will change to and stay in AUDITION.

 

  •  TRIM ENABLE: Touch will change to and stay in TRIM AUDITION.

 

  •  ISOLATE: Touch/Un-touch events of Isolated controls are not recognized 

by AutoTouchPlus. 

 

 

<Option>

  •  With <Read Safe> checked in the Misc Options page (see 

chapter 5.22.7

), 

AUDITION mode is defeated for controls in READ, and only written 

values will be heard.

 

  •  The 

TOUCH – Hold

 

button

 

may be overridden by checking options in 

the <Master Panel Overrides> section of the Master Panel Options page 

(see 

chapter 5.22.5

). Faders and Encoders can have 

TOUCH – Hold

 

set to 

<ON>, <OFF>, or to follow the ACU window <Follows Panel>. 

TOUCH 

– Hold

 

for Switches can also have <ON> and <OFF> overrides or be set 

to follow the ACU window <Follows Panel>.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды