Studer Vista 5 M3 Скачать руководство пользователя

Страница: 52 / 564

Vista 5 M3 Digital Mixing System

2-12 Desk Operation



(Copy/Paste All)



above, but includes

all

functions of a channel at the same time. This

includes input gains, AUX, fader and bus assign. This function ‘clones’ the

whole channel.

Hint for console setup:

Set one channel to the desired status, including bus

assignment etc., create a ‘super gang’ by linking all input channels together,

and press



(Copy/Paste All) twice. This will bring all linked channels into

the same status.



(Undo/Redo)

After having copied a setting into one channel, this key will reverse the last

paste function. If a clear function has been performed, this key will reverse

the last clear function. Note that

(Undo/Redo) remembers each channel’s

settings. It is therefore possible to undo a function on several channels by

applying

(Undo/Redo) on a gang.

There is also a shortcut for comparing settings within one channel:

• Press copy/paste in one channel twice (this copies the current value into

the clipboard and pastes it back into the channel).

• Now change to an alternate value.

• When pressing

Undo/Redo, the user can toggle between the two settings

and compare by listening.

Note:

By using the temporary function of this key, it is possible to compare

the two settings with a single key press!

CLR

After having pressed this key once, all possible destination keys (audio on/

off keys) are half-lit. Pressing one of them will reset its value to the default

value. Selecting the



(copy/paste all) key as the choice to clear will reset

all parameters within this channel, including bus assignment. It is also pos-

sible to use the

MULTI SEL

key (

chapter 2.3

) to clear multiple functions. In

order to set the fader of the channel to 0 dB, it is possible to touch the fader

after having pressed

CLR

. After releasing the fader, it will set to 0 dB.

CLR

can also be applied to a whole gang.

Document generated: 28.08.13

SW V4.9

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды