Studer Vista 5 M3 Скачать руководство пользователя страница 332

Страница: 332 / 564

Vista 5 M3 Digital Mixing System

5-36 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

5.6.1

Mix Pass Stack

There is an eight-position Mix Pass Stack which holds up to eight Mix Passes

in memory for immediate use. Mix Passes can only be played back from the

Mix Pass Stack. The Mix Pass Stack is located in the AutoTouchPlus window

on the GC.

Organization

The eight positions of the Mix Pass Stack are represented by eight Mix Pass

boxes arranged horizontally. The number of the Mix Pass will appear within

the Mix Stack position (box) in which it is stored. A Mix Pass can appear only

once within the Mix Pass Stack.

The box the furthest to the right is the position where Mix Passes are added

to the stack. As Mix Passes are added, any existing passes shift to the left.

When the Mix Pass Stack is full and a new pass is added, the Mix Pass in

the last position (far left position) will be deleted from the stack as one to its

right is shifted down.

In the example above, only three Mix Passes are loaded into the Mix Pass

Stack and the #5 pass is Active.

Adding a Pass to the Stack

Mix Passes are added to the Mix Pass Stack in the following ways:

• Creating a new Mix Pass: The newly created Mix Pass will be added to

the top of the Mix Pass Stack and becomes active. See ‘Creating a New

Mix Pass’ above.

• Double-clicking a Mix Pass in the Mix Tree: The selected Mix Pass will

be added to the top of the Mix Pass Stack and becomes active.

• Right-clicking a Mix Pass in the Mix Tree: The Mix Tree Right Click menu

will open. Selecting

Set As Read Mix

will cause the selected Mix Pass

to be added to the top of the Mix Pass Stack and become active.

Active Mix Pass

The ‘Active Mix Pass’ is the one played back and will be the basis for a new

Mix Pass if any changes are made. It contains the ‘Read Mix Data’ that is

used as new passes are created. The Active Mix Pass is indicated by a green

light above the active position and the box containing the pass number is

highlighted.

The Active Mix Pass may also be referred to as the Active Pass or Read Mix

Pass.

Selecting an Active Mix Pass

The Active Mix Pass is selected from the Mix Pass Stack in one of three ways:

• Clicking a Mix Pass in the Mix Pass Stack: That Mix Pass will become

active.

• Double-clicking a Mix Pass in the Mix Tree: If that Mix Pass is already in

the Mix Pass Stack it will become active. If it is not already in the stack,

the selected Mix Pass will be added to the top of the Mix Pass Stack and

becomes active.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Бренды по названию

Популярные бренды