Studer Vista 5 M3, Руководство по эксплуатации

Страница: 317 / 564

Vista 5 M3 Digital Mixing System
AutoTouchPlus 5-21
Document generated: 28.08.13 SW V4.9
values of all controls at the time the new Mix Tree was created. This value
will be retained in subsequent passes unless the Static value is changed.
Any time a control is adjusted (without being in Record), its Static value will
change. In other words, Static values may be changed as long as Record is
not engaged for the control.
Static Data Buffer Changed Static values are temporarily stored in the ‘Static Data Buffer.’ The
next time a new Mix Pass is created (usually by recording a Dynamic change
on another control), the contents of the Static Data Buffer will be stored in
the new pass. The old Static values will be retained in the previous pass. The
new values will be retained in any new Mix Passes made from the just cre-
ated pass. The Static Data Buffer may be cleared by clicking the Clear Static
button in the Auto TouchPlus window.
‘Clear Static’ Button The Clear Static button in the Auto TouchPlus window has two functions:
• When lit, the Clear Static button indicates there is information in the
Static Data Buffer and there is a difference between the current Static
values and those stored within the Active Mix Pass.
• Clicking the Clear Static button clears the values in the Static Data Buffer
and restores those stored within the Active Mix Pass. Clearing the Static
Data Buffer cannot be undone.
When the first Static object is changed within a Mix Pass, the Clear Static
button illuminates. As mentioned above, this indicates that there is data in
the Static Data Buffer. The values in the Static Data Buffer will be retained
and the button will remain lit until one of two things occur:
• A new Mix Pass is created;
• The Clear Static button is clicked.
Note
Static values can only be cleared on a global basis and cannot be cleared
individually.
When a new Mix Pass is created, the current Static values are written to the
new pass and the Static Data Buffer clears. When the Static Data Buffer is
cleared with the Clear Static button, the temporary Static values are erased
and the Static values stored in the current pass (Active Pass) are restored. In
either case the Clear Static button goes out.
< Option> In the Automation Options... menu, item Misc (also refer to chapter 5.22.7 ),
static objects can be protected under certain circumstances.