Studer Vista 5 M3, Руководство по эксплуатации

Страница: 79 / 564

Vista 5 M3 Digital Mixing System
Desk Operation 2-39
2.10 Optional TFT Level Meters
The TFT meterbridge option may also be retrofitted to the desk at a later point.
Installation instructions are described on a sheet shipped with the meterbridge
and also in chapter 10 .
Depending on console size, the TFT meterbridge features between two to
four screens dedicated to the metering. One more screen is used for display-
ing either the GC information of the desk control PC, the metering PC or
an external DVI signal; selection from these signals is done with the 3 keys
labeled
GC
,
INT
and
EXT
that are located just below this screen. Therefore no
external GC screen is required when using the TFT meter option.
The metering PC also features two USB sockets where a keyboard and a
mouse may be connected whenever it needs to be operated separately (e.g.
for a SW update).
For all possible channel types - mono, stereo, 5.1 - the metering goes with it,
as shown above. Priority was to have as large a bar graph meter as possible.
The lower area is configurable for displaying different options, depending
on the channel type, such as a surround image view, or a history diagram of
incoming or outgoing signal waveforms, for spotting anomalies in the audio
signal, such as overloads or signal loss.
Another option in the lower portion of the TFTs is a bus assignment view,
giving an overview of the channel’s current bus assignment, e.g. on a single
channel where bus assignment is changed frequently.
The control bay metering differs in that it is mainly made to show output
channels. More views are available, e.g. all AUX outputs, all groups, all
programme masters, direct outputs, bus outputs, N–1s, matrix channels, etc.
Four user pages can be configured. One has ten slots in one row, one 20 slots
Document generated: 28.08.13 SW V4.9