Studer Vista 5 M3, Руководство по эксплуатации

Страница: 164 / 564

Vista 5 M3 Digital Mixing System
4-20 GC Operation
Document generated: 28.08.13 SW V4.9
4.4.2.1.3 What Subcategories are There?
There are different subcategories for each of the Sources and Targets Lists:
Sources: Targets:
Each subcategory contains a number of Sources or Targets, depending on
the currently loaded configuration. Sometimes certain sections will not be
present; for example, if no Channel Inserts have been configured, there will
be no Insert Send section within the Sources List, and no Insert Return section
within the Targets List.
The size of the X-Y General Patch automatically adapts to the number of chan-
nels, input interfaces, output interfaces, and to the presence of DSP function
blocks in the channels – as defined in the currently loaded configuration.
Some detail information on the sections:
Sources List: Dir Out All Direct Outputs of all channel types.
Input Ports All input audio interfaces (AES/EBU, MADI, or D21m A/D converters).
Insert Send
Sends from the inserts of all channel types.
Bus Out
Unlike analog consoles, with the Vista any bus is a valid audio signal source;
e.g. an AUX mono bus can be used to feed an output interface, or to become
an input to an input channel.
Generator The test generator’s signal.
Targets List: Channel In1
First audio input to all channel types,
• Free to use for all input channels,
• Used for default connection of the corresponding Bus for an output chan -
nel, such as a Group, Master, or Aux channel.
Channel In2
Second audio input to all channel types,
• Free for all input and output channels.
Channel In3 Third audio input to all channel types,
• Used for the Test Generator connection per default,
• Can be re-patched to any source at any time.
Output Ports
All output audio interfaces (AES/EBU or MADI, D/A converters).
Insert Returns
Returns to the inserts of all channel types.
Dyn Ext Key Input for the external control signal (key) to the Dynamics Sidechain of all
channel types.