Studer Vista 5 M3 Скачать руководство пользователя

Страница: 312 / 564

Vista 5 M3 Digital Mixing System

5-16 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

5.3.2

Features

There is an impressive array of features built into AutoTouchPlus. A summary

of these features follows.

Mix Management

Automation Mix files are managed via the Mix Tree System (MTS). The MTS

will work in conjunction with the expanded Mix Pass Stack (8 Mix Passes).

Each and every Mix Pass will be automatically saved and archived within

the Mix Tree. Multiple Mix Trees can be created within a Title. Any previous

mix can become the Active Pass (or Read Mix Pass) for a subsequent Record

Mix Pass. The MTS is maintained between sessions, so that when a mix is

recalled days or weeks later, the entire Mix Tree will be available to the new

session. The Mix Tree may also be hidden so that all mix management can

be done within the Mix Pass Stack. At any time the Mix Tree may be made

fully visible again. Mix Passes may be named and comments may be added.

A full mix link history is maintained.

Static Objects

When a mix is first created (when a Mix Tree is first opened) all automatable

controls are Static Objects. Static objects act just like manual controls except

that their final setting is remembered by the automation. All controls remain

Static until a Dynamic move is recorded.

Any switch, fader or knob (automation objects) may be classified as a Static

object. They may be adjusted at any time during the mix process without need-

ing to put them into a

Write Enable

Record

automation mode (similar

to mixing on an analog console). The value of all static objects is maintained

on a pass-by-pass basis. This simplifies the ‘tweaking’ of the hundreds of

controls within a mix session that must be adjusted, but will never change at

timecode locations. Should a Dynamic move be required for a Static object,

the move can be simply written into the mix, and the object is transformed

automatically into a Dynamic automation object. This simple and effective

system will greatly enhance the mix process and dramatically improve mix

efficiency.

Independent Automation Modes

Different channels may be in different automation Control Modes. For ex-

ample some channels may be in

Write Enable

while others may be in

Trim

Enable

. In addition, different controls (objects) within channels may be in

different modes. For example the fader may be in

Trim Enable

, while the

mute is in

Write Enable

, and the rotaries are in

Read

. Any combination is

possible.

TOUCH – Record

Function

TOUCH – Record

allows an enabled control to enter

Record

when

touched. With

TOUCH – Record

turned off, a control be auditioned before

it is punched-in to Record. With

TOUCH – Record

engaged, touching a

Held-

enabled control will permit an intentional ‘jump level’ punch-in if the

Audition value is different from the

Read

Mix value.

TOUCH – Hold

Function

With

TOUCH – Hold

engaged, the setting of a touched control will be

maintained when it is released. If

TOUCH – Record

was enabled before

the control was touched, it will stay in

TOUCH – Record

upon release.

TOUCH – Hold

can function for faders, rotaries, and switches and can work

Read

Write Enable

, and

Trim Enable

modes.

Held Plays Mix

This feature allows the read mix to be heard, even though one or more ob-

jects are being held in an audition state awaiting a punch-in. This allows true

emulation of the resultant mix, while the mix pass is being run.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды