Studer Vista 5 M3 Скачать руководство пользователя

Страница: 180 / 564

Vista 5 M3 Digital Mixing System

4-36 GC Operation

Document generated: 28.08.13

SW V4.9

4.4.3.5

Set the Metering and Direct Out Source Point

Set Metering Source Point:

To set the Metering Source point in the selected channel’s audio path, click

on one of the three Meter boxes. The channel meter will now be sourced from

the selected point in the signal path.

Available points in the signal path are:

• After Input Block;

• After Fader & Mute;

• After Direct Out level control.

The Meter Source point is saved within snapshots and presets.

Note:

There will only be two Meter Source points if Direct Outputs have not been

configured for the selected channel.

To set the Metering Source points for more channels at a time, use the Option

– Meter/Generator menu (refer to

chapter 4.6.4.1

Set Direct Output source Point:

If a Direct Output is included in a channel’s configuration, it can be fed from

one of three points in the audio path. To set the Direct Output source point,

click on one of the three ‘wires’ connected to the Dir Box (the current con-

nection will be shown

solid

, while the two possible connections are displayed

dotted

lines).

The Direct Out will now be fed from the selected point in the signal path.

Available points in the signal path are:

• After Input Block;

• Pre Fader & Mute;

• After Fader & Mute.

The selected Direct Output source points are saved within snapshots and

presets.



Tip

If you have changed the order of the processing blocks, note that the Meter

and Direct Out source points will move

together

with the processing blocks

to which they are attached (except the Input Block, which cannot be moved).

4.4.3.6

Switch off the Label Inheritance

The Desk Label displays will show Source Labels (from the General Patch)

if the console is set to Inherited Label mode and if a source is patched in to

the channel. If you wish to remain in Inherited Mode, but do not wish to see

Source Labels for certain channels, check the Defeat Source Label Inheritance

box. The Desk Label display will now show the name of the channel rather

than the Source Label, assuming the user label on the Channel Patch has not

been changed from the default. If the user label has been changed on the

Channel Patch screen, the Desk Labels will display this user label when the

Defeat Source Label Inheritance box has been checked. user labels entered

on the Channel Patch screen are saved with snapshots and presets.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды