Studer Vista 5 M3 Скачать руководство пользователя

Страница: 83 / 564

Vista 5 M3 Digital Mixing System

Desk Operation 2-43

Online, With Desk/Core Takeover

Virtual Vista can connect to the core only if there is a second network connec-

tion from the Virtual Vista computer to the second port of the SCore Live’s

bridge card.

Primary

Secondary

Bridge Port 1

Bridge Port 2

Should the desk fail, e.g. due to a power loss, the online editor can be used to

continue the session. This can be thought of as an additional failsafe scenario.

In such a case, the

CONNECT TO CORE

button can be used for taking over

direct control of the core. By turning yellow, it indicates that the takeover

process has been started.

However, since only one Vista instance can be used at a time, in such a case

the Vista desk is disconnected from the core. Therefor using the

CONNECT

TO CORE

button is recommended only if the desk can no more be operated.

Notes

The online editor has no access to monitoring facilities except PFL/Solo.

Clicking PFL or Solo on a channel in the online editor will feed the selected

signal to the PFL output of the desk.

After a takeover, Virtual Vista always starts in the same (static or dynamic)

operating mode that was used to start the console. In dynamic mode, however,

operation is much more convenient with the touch-sensitive desk controls.

Virtual Vista only has a limited range of applications in dynamic mode, such

as entering/editing labels.

Document generated: 28.08.13

SW V4.9

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды