Studer Vista 5 M3 Скачать руководство пользователя

Страница: 291 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-147

Document generated: 28.08.13

SW V4.9

4.7.7

Offline Conferencing

When configuring the N–X buses, a subset of N–X owner channels may be

defined to be members of a conference. Whenever their fader is closed, they

will automatically hear all other members (without hearing themselves back),

rather than the normal N–X signal. As soon as the fader is opened, they will

instantly hear the N–X signal again.

4.7.7.1

Offline Conference Setup

By pressing the

SETUP CONF

key on the control bay, the console is put

into conference setup mode. The

LINK / SEL

keys of all possible conference

member channels (all N–X owner channels) are half-lit, and the user may

select any number of them to be members of the conference. If the user

wishes to adapt this setting frequently, he may even stay in this mode during

a live production, since the channels are instantly added or removed from the

conference when pressing their

LINK / SEL

key (however, other features such

as ganging will not be available while in setup mode).

All the channels currently defined as conference members are marked in the

strip setup window.

The conference icon in the toolbar has three states:

Grayed out

No conference active nor defined

Colored

Conference active (if member faders closed)

Colored, crossed out

Conference defined, but temporarily deactivated (even if member faders

closed).

Note:

In certain circumstances, also an

AUX

master can be selected as a conference

member (indicated by its half-lit

LINK / SEL

key). This is intended for adding

e.g. an on-air signal to the conference. See details below.

4.7.7.2

Talk to the Conference

When pressing the

TALK

key on a channel which is currently conferencing,

the talk function is automatically activated

all members of the conference

at the same time.

4.7.7.3

Temporary Conference Deactivation

The conferencing may temporarily be deactivated by clicking on the confe-

rence icon

in the toolbar or the

CONF ON

key. In this case the conference

definition is retained. As soon as the conference is reactivated globally (by

pressing

CONF ON

or clicking on the conference icon in the toolbar again),

the previously selected channels may talk to each other again. Temporary

activation of the

CONF ON

key is possible as well.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды