To cancel false alarms or test your system call –
(913) 432-4545
For sales or service for you Atronic alarm call --
(913) 362-0000
YOU MAY CALL EITHER OF THESE NUMBERS AFTER HOURS TO REACH OUR 24 hr
EMERGENCY TECHNICAL SUPPORT TECHNICIAN
WWW.ATRONICALARMS.COM
WWW.ATRONICALARMS.COM
WWW.ATRONICALARMS.COM
WWW.ATRONICALARMS.COM
HAI Omni Quick Reference Guide
Arming your system:
Pressing any of the arming buttons
twice,
or pressing any of the arming buttons
once followed by your code will arm the system in the desired mode.
Arming Buttons:
Adding or changing codes:
Press 9 + your code + 1 (Code). You are now at “Code 1” this is the Master code
slot. Enter the code you would like (4 digits) and press #. To add an additional
user code scroll down to “Code 2” and enter a new code (4 digits) and press #.
Bypassing a zone:
Press 2 + 8 + Scroll down to the desired zone and press # then your code.
(To un-bypass press 2 + 9 + 0 + # + your code)
Panic Buttons:
Press & hold as shows below to activate panic alarms (Note: Immediate Dispatch)
Hold buttons
1 & 3
for
POLICE
Hold buttons
4 & 6
for
FIRE
Hold buttons
7 & 9
for
MEDICAL
Resetting System & Clearing Troubles:
If you have any “trouble” type messages always try pressing * to clear the system
If the system is beeping and you are unsure why try pressing * to clear the system
If you have a
fire
alarm you must arm and disarm the system to reset your system
