Studer Vista 5 M3 Скачать руководство пользователя

Страница: 287 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-143

Document generated: 28.08.13

SW V4.9

On first press, the

SETUP: GROUPS

key is lit to show that an activity has been

started but not yet finished. All

LINK/SEL

keys of Control Group Master chan-

nels are half-lit. Pressing one of these enables setting up the corresponding

Control Group. The

LINK/SEL

keys of the Control Group members are lit,

the ones of non-members are half-lit. The graphical controller automatically

activates the Control Group Filter dialog (see above) for the selected Control

Group.

When a Control Group is selected for editing, member channels can be

added or removed from the Control Group by using their

LINK/SEL

keys. If

the

MULTI SEL

key is deactivated, all members are cleared upon pressing any

LINK/SEL

key, similar to creating a gang. During editing, the Control Group is

not active, i.e. the setting of the Control Group Master can be changed without

influencing the members. This can be used to adjust the offset between the

Master and the Members if required.

Editing a control group can be terminated either by pressing the

LINK/SEL

key

of the master, or by exiting setup mode by pressing the

SETUP: GROUPS

key

in the control bay. If you now want to proceed with editing of another control

group, first deselect (using the

LINK/SEL

key) the Control Group Master you

have just finished with, and then select the new one that you wish to edit.

Control Group Filter

When Control Group Editing is activated, the graphical controller automati-

cally activates the Control Group Filter dialog box for the selected Control

Group (see screenshot on the previous page).

In the Control Group Filter dialog, the user can define functions to be grouped

or not. To group the desired function, the appropriate Select checkbox must

be checked. If Select is unchecked, the functions’ control can be moved freely

without influencing the members. Normally, when the members are grouped,

their local values of Fader/Mute are left untouched when the group is formed

– they are grouped in a relative way. If absolute grouping is desired, values

can be copied from the master to the members:

• By checking the Copy Enable checkbox and clicking on Copy;

• By completing the editing of a group while the Copy Upon Setup checkbox

is checked.

There is also a context menu available, called up by right-clicking within the

edit dialog:

• If the cursor is placed over the Select items, the menu allows to check or

clear all select boxes;

• If the cursor is placed over the Copy column, the menu allows to check

and clear all copy parameters;

• and if it is placed over a white space, it does both.

Note:

The Control Group Filter dialog box can also be started by clicking on the

Control Group Filter item on the Options menu of the graphical controller.

Clicking on the Close button does

not

terminate the Desk editing mode.

Absolute/Relative

Faders are implicitly controlled in a relative way. This means that all the

members will remain in relative positions to each other when the Master Fader

(or other control) is moved. The member Faders can be forced to match the

Master Fader using the Copy function in the Control Group Filter dialog, see

above.

Muting can be controlled in absolute and relative mode. The relative (Toggle)

mo de for the Mutes can be selected by the user in the Group Filter dialog.

If selected, the Mutes can be set to On or Off on the members and will be

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды