Studer Vista 5 M3 Скачать руководство пользователя страница 338

Страница: 338 / 564

Vista 5 M3 Digital Mixing System

5-42 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

5.7.2

Write

Write Enable

is the primary data recording mode of the system. Controls

Write Enable

are armed for recording and those in

Record

will write

changes to a new Mix Pass.

Write Enable

Rules

Record

Off:

•

Write Enable

: The control acts the same as if it were in

Read

(replaying

the mix Read data), but is armed to go into

Record

- A new Mix Pass is not generated unless

Record

is engaged.

Record

On:

•

Record

: The absolute value (level) of the control is written into a new

Mix Pass.

- Read mix values are overwritten.

- At the end of a pass in which at least one control was in

Record

, a

new Mix Pass is generated based upon the Active Mix Pass and the

newly recorded data.

Note

Record

is a destructive mode in regard that previously written data is over-

written. However, mix data is never lost because a new Mix Pass is generated

at the end of every

Record

pass. All Mix Passes are retained in the Mix Tree

unless purposely deleted.

The Vistonics concept allows displaying the current and replay values of

rotary and fader controls in a very clear and comfortable way.

Rotary Values

Current and replay value of the rotary control: If the current value is different

from the one within the last mix pass, a pink colored element indicates the

value of the last mix pass, while the main display is indicating the current

value.

Fader Values

Current and replay value of the fader: If the current value is different from

the one in the last mix pass, a pink colored element indicates the value within

the last mix pass, while the main display is indicating the current value.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Бренды по названию

Популярные бренды