Studer Vista 5 M3 Скачать руководство пользователя страница 418

Страница: 418 / 564

Vista 5 M3 Digital Mixing System

5-122 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

5.17.3.2

Spread Source Mix

The Spread Source Mix allows external mix data from a single point in time

(Data Point) to be applied to the Active Mix. The data from the selected point

in an external mix (Spread Source Mix) is applied to the selected objects, on

the selected channels, in the Active Mix during the Edit Region.

The Spread Source Mix combo box has two primary control sets:

•

Mix Selection Menu:

used to select the Spread Source Mix;

•

Timecode Entry Fields:

used to select the Data Point from the Spread

Source Mix.

In addition, an Offset combo box is provided, so that the Active Mix and the

Spread Source Mix

In Times

can be easily offset from each other.

Mix Selection Menu

This pop-up menu box provides a list of mixes available to become the Spread

Source Mix. This list contains the same mixes available to the Active Mix

and functions using the same selection techniques.

Note

The Spread Source Mix is typically different from the Active Mix. However,

it can also be the same mix as the Active Mix.

Timecode Entry Field

For a Spread Edit to be performed, a Data Point (a single timecode address)

must be selected from within the Spread Source Mix.

The Data Point is defined using a Timecode Entry Field. The Spread Source

Mix has one Timecode Entry Field:

In Time

Point from which the Spread Source Mix data originates, i.e. the timecode

address of the Data Point.

The In Time from the Spread Source Mix is selected using the same techniques

used for selecting the Active Mix timecode addresses.

Notes

The In Time selects the Data Point (a specific frame) from the Spread Source

Mix. This fixed data is applied throughout the entire Edit Region in the Active

Mix.

Refer to

chapter 5.17.4

for additional details regarding timecode entries.

Offset Controls

An Offset combo box is provided for easy control of offsets between the Ac-

tive and Spread Source Mix In Times.

The Offset combo box for the Spread Source Mix contains the following

controls:

Down Arrow

Moves the Active Mix In Time to the Spread Source Mix In Time

Up Arrow

Moves the Spread Source Mix In Time to the Active Mix In Time

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Бренды по названию

Популярные бренды