Studer Vista 5 M3 Скачать руководство пользователя

Страница: 284 / 564

Vista 5 M3 Digital Mixing System

4-140 GC Operation

Document generated: 28.08.13

SW V4.9

Clear Selection button:

This button will clear all Speaker/Source selections made for that Monitor

Source Selector key.

Source Type Selection box:

This box provides a pop-up menu used to select the type of digital source for

assignment (such as a mono master direct output or an AES interface). Once

an item has been selected, all the sources of that type will be displayed in the

Sources list below.

Source Selection box:

This box displays a list of digital sources of a specific type that are available

for assignment to loudspeaker feeds.

Load button:

This button brings up a familiar Windows box from which an existing monitor

configuration file can be loaded.

Apply button:

This button applies the current monitor configuration file to the Vista. This is

handy when testing a recently edited file or recalling a previously saved file.

Save and Save As... buttons:

The Save button allows a previously saved monitor configuration file to be

updated after editing. The Save As... button allows a new file to be named

and created.

OK and Cancel buttons:

The OK button accepts the current monitor setup and closes the window. Cli-

cking OK does

not

apply or save the monitor configuration file. The Cancel

button exits the monitor setup screen.

Monitor File Name entry box:

This field is used to enter a name for a new monitor Configuration.

Application Progress indicator:

This meter displays the progress of the loading of the monitor configuration

file when it is applied to the console.

Applied and Saved Status boxes:

These boxes display the status of the current monitor configuration file. If

checked, the current file is applied to the console and/or saved.

To create a new monitor configuration file:

• First open the Monitoring Setup utility from the Monitor section of the

SysAdmin menu.

• Select the desired Assignable Source Selector panel and key, using the lists

on the left.

• Select a source type and source from the lists on the right.

• Highlight the selected source and click on the double-arrow (<<) button

next to the desired loudspeaker feed in the Selection boxes. The source

name will appear in the selected location. Once a key is selected, its name

may be changed using the Display Name field.

• Repeat these steps to complete the necessary assignments. Once finished,

the new file can be saved and applied to the console.

Please note that the edited file must be applied to the console before it takes

effect.

Existing monitor configuration files can be edited by recalling them with the

Load button and using the procedures described above.

Config Dump:

This action will create a copy of the current monitor configuration file and

place it in the

D950SYSTEM

directory. The copied file will be named

MONCON-

FIGDUMP.DAT

and is useful for troubleshooting. In this status this file is not

executable since it does not have a

*.ini

extension. However, it does contain

all the parameter settings and other information.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды