Studer Vista 5 M3, Руководство по эксплуатации

Страница: 405 / 564

Vista 5 M3 Digital Mixing System
AutoTouchPlus 5-109
Document generated: 28.08.13 SW V4.9
• Event Lists: Individual Event Lists may be selected by clicking the Event
List header or the associated timecode.
• Selected Events and/or Event Lists: A group of selected Events and/or
Event Lists may be chosen using any of the following methods:
- Click and Drag: Click and hold on an Event or Event List and drag
the cursor over the desired items. This allows adjacent items to be
selected.
- Control-clicking (holding the Ctrl key plus single-clicking): Allows
selection of individual Events and/or Event Lists anywhere within
the Event List Editor. Items may be selected regardless of location,
so non-adjacent items may be chosen.
- Shift-clicking (holding the Shift key and single-clicking): Allows
selection of a range of Events and/or Event Lists. Clicking a pair of
items while holding down the Shift key will select those items and the
ones in-between.
Event List Editor Operations The following operations may be performed using the Event List Editor:
Redisplay Event List Near Current Timecode: Opens the Event List
closest to the current or selected timecode location.
Copy Event(s) to New Timecode: The selected Events and/or Event
Lists are copied and pasted to a new timecode location. When selected,
a timecode entry box will open.
Move Event(s) to New Timecode: The selected Events and/or Event
Lists are moved to a new timecode location. When selected, a timecode
entry box will open.
Move Event(s) One Frame Earlier: The selected Events and/or Event
Lists are moved one frame earlier. The selected items are ‘nudged
backward.’
Move Event(s) One Frame Later: The selected Events and/or Event
Lists are moved one frame later. The selected items are ‘nudged for-
ward.’
Delete Selected Events: The selected Events and/or Event Lists are
deleted from the resultant Mix Pass. Caution: No warning prompt is
given. See Note below.
Expand and Show Each Event at a Timecode: All Events Lists are
opened and each Event is displayed with its timecode location.
Consolidate Multiple Events at Each Timecode: Only Events Lists are
shown at each timecode location. Individual Events will be shown only
if they are the only Event at that timecode location.
Filter Which Events to Display: Opens the Object Picker for the Event
List Filter.
Each time an Event List edit operation is performed, a new Mix Pass is cre-
ated.
Note Deleting an Event or Event List is a destructive operation. However, the
original Active Pass on which the edit is to be performed is retained and a
new Mix Pass is created without the deleted item. In this regard, deleting an
item is a non-destructive operation.