Studer Vista 5 M3 Скачать руководство пользователя

Страница: 507 / 564

Vista 5 M3 Digital Mixing System

DAW Control 7-3

Document generated: 28.08.13

SW V4.9

DAW CONTROL

7.1 Basics

With the Vista consoles it is possible to directly operate Digital Audio Work-

stations (DAW) from the desk surface. This is realized by using two differ-

ent serial communication protocols: The more straightforward and simpler

‘Mackie Control Protocol’ and the more complex ‘Mackie HUI Protocol’.

A choice of the most popular DAWs is supported and has been tested with

the Vista desk control:

• Digidesign ProTools (Mackie HUI protocol)

• Apple Logic Pro (Mackie control protocol)

• Merging Technologies Pyramix (Mackie HUI protocol;

Mackie control

protocol not fully supported

)

• Steinberg Cubase / Steinberg Nuendo (Mackie control protocol;

Mackie

HUI protocol: only 8 channels supported

)

• Magix Samplitude / Sequoia (Mackie HUI protocol, Mackie control pro

tocol)

• SADiE (

Mackie HUI protocol: only 8 channels supported; Mackie control

protocol: only 24 channels supported

Thanks to an extended strip setup, so-called DAW channels can be inserted

into any desired slot of the setup. With a DAW channel a number of DAW

controls can be operated, as provided by the Mackie Control protocol: The

fader level as well as the status of mute, solo and track arming. The transport

control keys on the desk can be used for transport commands to the DAW.

Transport control keys are optional on the desk of the larger Vista versions

only; on any Vista console, however, the transport controls are available in

the TC/Generator window; they can also be used for transport commands to

the DAW.

The TC/Generator window is opened by a click on the GC toolbar icon shown

left.

Note

DAW channels are excepted from snapshots and presets, no DAW settings

will be saved or can be recalled, apart from the channel strip position defined

in the strip setup. In addition, DAW channels cannot be automated by the

dynamic automation; however, this can be made on the DAW itself in an

elegant way.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды