Studer Vista 5 M3 Скачать руководство пользователя

Страница: 7 / 564

Installation / EMC

Class I Equipment (Mains Operation)

Should the equipment be delivered without a matching mains cable, the

latter has to be prepared by a trained person using the attached female plug

(IEC 320 / C13 or IEC 320 / C19) with respect to the applicable regulations

in your country.

Before connecting the equipment to the AC power outlet, check that the local

line voltage matches the equipment rating (voltage, frequency) within the

ad missible tolerance. The equipment fuses must be rated in accordance with

the specifications on the equipment.

Equipment supplied with a 3-pole appliance inlet (protection conforming to

class I equip ment) must be connect ed to a 3-pole AC power outlet in such a

way that the equipment ca binet is connected to the protective earth.

For information on mains cable strain relief, please refer to Appendix 2.

Female Plugs (IEC320), Front-Side View:

IEC 320 / C19

IEC 320 / C13

European Standard

(CENELEC)

North American Standard

(NAS)

Brown

L (Live)

Black

Blue

N (Neutral)

White

Green/Yellow

PE (Protective Earth)

Green (or Green/Yellow)

Class III Equipment (Battery Operation up to 60 VDC)

Equipment of this protection class must be earthed using the provided earth

terminal if one or more external signals are connected to the unit (see expla-

nation at the beginning of this paragraph).

Electromagnetic Compatibility (EMC)

The unit conforms to the protection requirements relevant to electromagnetic

phenomena that are listed in guidelines 89/336/EC and FCC, part 15.

• The electromagnetic interference generated by the unit is limited in such

a way that other equipment and systems can be operated normally.

• The unit is adequately protected against electromagnetic interference so

that it can operate properly.

The unit has been tested and conforms to the EMC standards of the speci-

fied electromagnetic environment, as listed in the following declaration.

The limits of these standards ensure protection of the environment and cor-

responding noise immunity of the equipment with appropriate probability.

However, a professional installation and integration within the system are

imperative prerequisites for operation without EMC problems.

For this purpose, the following measures must be followed:

• Install the equipment in accordance with the operating instructions. Use

the supplied accessories.

• In the system and in the vicinity where the equipment is installed, use only

components (systems, equipment) that also fulfill the EMC standards for

the given environment.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды