Studer Vista 5 M3 Скачать руководство пользователя

Страница: 289 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-145

Document generated: 28.08.13

SW V4.9

4.7.6.3

Option: VCA-Style Control Groups (‘Motors Off’)

The ‘Control Group Masters’ in a classic sense were implemented in such a

way that all channel faders belonging to a certain control group would auto-

matically move whenever the master fader was moved. This has the advantage

that you always visually see the audio settings currently active in the DSP

core. However, there are two drawbacks to this behavior:

When the Control Group Master fader is closed, the user cannot adjust the

balance between the member channels, since they are moved down together

with the master fader.

When the master fader is closed, it is still possible that there is some audio

passing through some of the member channels, since their fader is not com-

pletely closed.

With software release 3.4, there is now an alternative way of how the control

group master channels can work, that is very similar to the VCA groups of an

analog mixing console. Sometimes, this new behavior is also called ‘motors

off’. In this mode, the value set on the control group master channels (as

seen on their scale) is added to or subtracted from all member channels, and

the resulting (audio) level is set in the DSP core. The faders of the member

channels don’t move up/down, and so it is possible to have the master fader

closed but still to correct the balance between the member faders. In addition,

the user can be sure that whenever the master channel is closed, no audio can

be heard from the member channels. Since the fader of a member channel

doesn’t represent the real audio value anymore, the digits below the label

display are indicating the

real

audio value.

Notes

If ‘VCA style’ operation is active, you may see member channels change their

fader values as soon as they are added to a control group. This is the case if

the master channel is already set to a value different from 0 dB at the moment

when a new slave channel is added to the group. This behavior is by intention,

in order not to have any audio changing when adding or subtracting member

channels from a control group. Example: You have set a microphone channel

to –15 dB, and you add it to a ‘VCA’ group the master channel of which is

already set to –10 dB. In the moment the microphone channel is added to that

group, the user will see the microphone fader jump up to –5 dB. This results

in no audio change, as requested.

The

VCA style Control Groups

option can be found in the Option menu

of the graphical controller screen.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды