Studer Vista 5 M3 страница 274 Скачать руководство пользователя

Страница: 274 / 564

Vista 5 M3 Digital Mixing System

4-130 GC Operation

Document generated: 28.08.13

SW V4.9

A Source or Target can be assigned to any of the Subclasses, but

only to one

Subclass at a time

To reassign an item or items from a Subclass, use the same selection tech-

niques as above. Then you can:

• Click on the Clear Subclass button to remove the selected items from the

Subclass. This will return the selected items to the Digital Input or Digital

Output Patch Section;

• Click on a different Subclass button to directly re-assign the selected items

from the current Subclass to another Subclass.

The result of this process is that the subclassified sections are now visible in

the Patch lists and can be directly accessed using the right touch pad button.

For details, refer to

chapter 4.4.2.3

Notes:

Subclass names are saved and recalled with User Preferences.

Assignment of individual interfaces to subclasses is saved in each snapshot

preset and can therefor vary from snapshot to snapshot.

4.7.2

SysAdmin: General Patch – ProBel Setup

There is only one accessible item in this menu: Enable Probel Setup on Gen-

eral Patch.

4.7.2.1

-Party Control of Console Patch (Native Pro-Bel P-02/08 Support)

Since version 3.5 of the Vista Software, these products are able to support

Pro-Bel enabled devices natively, and so a second PC is no more necessary for

this functionality. However, we do not recommend that existing installations

are altered that are already in use with a second PC for Pro-Bel interfacing.

The explanations below are therefore intended for installation personal and

not for the console operators.

Supported Functionality

Our implementation enables the ability to map certain Pro-Bel connect

requests to a set of definable patch connections. The control of patch points

is not restricted to set output patch points. It is possible to set any patch points

within the console patch upon reception of a Pro-Bel command. The set-up

procedure is done from the General Patch screen, where certain patches can

be selected (by just selecting the affected targets) and which are being mapped

to a Pro-Bel source/destination combination with a single click on a dialog.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды