background image

       Pg1  Welcome

       Pg2  Pack contents

       Pg3  Before use

       Pg4  Safety Instructions

       Pg5  Features: TT1000

       Pg6  Turntable setup

       Pg7  Features: Mix 2 top panel

       Pg8  Features: Mix 2 rear panel

       Pg9  Setup diagram

Pg10-12  Getting going

Pg13-14  Troubleshooting

              Specifications 

CONTENTS

WELCOME TO THE WORLD OF 

Congratulations you have joined one of the many people who have chosen the HomeMix TT-1000M for all their mixing needs. As usual we ask you to 

study this entire manual to familiarise yourself with the operating controls of the unit, however we also realise that most people only read this manual 

when something goes wrong! So especially for you, we have provided the following easy to understand ‘fast set up diagram’, plus we have included a 

separate ‘fast set up sheet’, which will ensure you are mixing in the fastest possible time. For further in depth knowledge of how to use the HomeMix 

TT-1000M, please read the contents of this manual in its entirety, taking special note of the next two pages which list some very important safety 

information.

1

Summary of Contents for TT-1000M
















Reviews: