Sterling 360 Скачать руководство пользователя

Страница: 99 / 213

9-4

Interior equipment and accessories

Use the coat hooks to hang clothing or similar

items.

CAUTION

Do not pull the coat hooks with excessive force

or hang heavy items on them. This could cause

them to break.

The sun visor screens your eyes from sunlight.

Change its angle as needed. Unhook the inside

edge of the sun visor and swing it sideways to

reduce glare from the side. There is a ticket holder

on the back of the driver’s sun visor.

The dome light can be used with the ignition switch

in any position.

CAUTION

Always turn off the lights before you leave the

vehicle. Do not leave the dome light illuminated

for a long period of time when the engine is not

running. This can discharge the battery and pre-

vent the engine from starting.

1 Dome light

•

“ON” position

The light illuminates with the door open or

closed.

•

“

•

”

position

The light illuminates when either door is opened

and goes off when the door is closed.

•

“OFF” position

The light is off with the door open or closed.

Coat hooks

Sun visors

Dome light

Z08840

Z11377

Z11987

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды