Sterling 360 Скачать руководство пользователя

Страница: 31 / 213

4-5

1 Shoulder belt fastening and unfastening

NOTE:

It is not necessary to adjust the length of these seat

belts.

A seat belt with ELR extends and retracts automati-

cally as its wearer moves. In the event of a sudden

stop or shock, it locks automatically to protect its

user.

The belt’s tightness should be adjusted automati-

cally. If there is any looseness, lift the shoulder belt

gently and the mechanism will take up the slack.

With the belt properly tightened, the risk of it slip-

ping off in a collision is reduced.

1.1

Fastening

1. Hold the belt link and gently extend the belt. If

the belt locks or is difficult to extend, let it retract

and pull it gently again.

2. Take care that the belt does not become twisted.

Insert the link into the buckle until you hear a

click.

3. Pull on the link to confirm that it is firmly fas-

tened.

4. Adjust the belt so it is across your hips and

shoulder.

1.2

Unfastening

1. Press the release button to unlock the buckle.

2. The belt automatically retracts when unlocked.

To prevent the link causing damage or injury,

hold it while the belt retracts.

3. Adjust the slide to put the link in an easy-to-

reach position and prevent it from slipping.

2 Lap belt

2.1

Fastening

1. Take care that the belt does not become twisted.

Insert the link into the buckle until you hear

a click.

2. Pull on the link to confirm that it is firmly fas-

tened.

3. Adjust the belt so it is low across your hips.

4. To adjust the belt’s length, hold the link at 90

the belt.

5. Pull the belt end to shorten the belt or the link

end to lengthen it.

To lengthen

To shorten

2.2

Unfastening

1. Press the release button to unlock the buckle.

2. When the belt is not in use, insert the link into

the buckle.

WARNING

For maximum protection in the event of an

accident, the belt must not be loose. A prop-

erly tightened belt can prevent injuries.

Z10760

Z11726

Z01351

Z08774

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды