Sterling 360 страница 106 Скачать руководство пользователя

Страница: 106 / 213

10-3

•

If the engine fails to start, return the ignition

switch to the “ACC” or “LOCK” position. Wait for

the battery to recover before trying to start the

engine again.

•

As the temperature falls, battery performance

decreases. Check the battery electrolyte level

and its specific gravity.

P. 11-58

•

In cold weather, use a windshield washer fluid

additive in the concentration indicated by the

manufacturer’s instructions.

CAUTION

Do not put engine coolant or antifreeze into the

washer fluid. This could cause paint damage.

•

Check the undercarriage and fender wells in

snowy weather. If necessary, remove snow and

ice, taking care not to damage the vehicle.

•

If the brakes freeze, either from driving on snow-

covered roads, or while parked in cold weather,

braking performance can be reduced. Drive

carefully and be alert to other traffic. With frozen

brakes, drive slowly and put light pressure on

the brake pedal. This will warm the brakes.

•

When parking your vehicle, select a site not

directly exposed to wind or snow. Face it away

from the wind.

•

Do not apply the parking brake in extremely cold

conditions. This could cause it to freeze and

become impossible to release. In cold condi-

tions, do the following steps to park the vehicle:
1. Stop the vehicle and set the parking brake.

Never park on a slope.

2. Chock all the wheels securely.

3. <manual transmission> Shift into first gear or

reverse.

<automatic transmission> Move the shift

selector to “P” (park).

4. Release the parking brake.

Cold weather operation

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды